BS EN 10325-2006 Steel. Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index)
|
ID： |
65ABA74E468D46D4AF2237201E87D057 |
|
文件大小(MB)： |
0.22 |
|
页数： |
10 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10325:2006,Steel — Determination,of yield strength,increase by the effect,of heat treatment,[Bake-Hardening-Index],The European Standard EN 10325:2006 has the status of a British,Standard,ICS 77.040.10; 71.080.20, , , ,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:40:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 10325:2006,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 29 September 2006,. BSI 2006,ISBN 0 580 48971 X,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 10325:2006.,The UK participation in its preparation was entrusted by Technical Committee,ISE/NFE/4, Mechanical testing of metals, to Subcommittee ISE/NFE/4/1,Uniaxial testing of metals.,A list of organizations represented on ISE/NFE/4/1 can be obtained on request,to its secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:40:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10325,August 2006,ICS 77.040.10; 71.080.20,English Version,Steel - Determination of yield strength increase by the effect of,heat treatment [Bake-Hardening-Index],Aciers - Détermination de l'augmentation de la limite,apparente d'élasticité due à un traitement thermique (index,de durcissement à la cuisson [Bake-hardening]),Stahl - Bestimmung der Streckgrenzenerh鰄ung durch,W鋜mebehandlung (Bake-Hardening-Index),This European Standard was approved by CEN on 7 July 2006.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2006 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10325:2006: E,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:40:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EN 10325:2006 (E),2,Contents,Foreword.3,1 Scope..4,2 Normative references .4,3 Terms and definitions 4,4 Symbols and designations .6,5 Principle.6,6 Test equipment .6,7 Test pieces ..6,8 Testing procedure6,8.1 Testing conditions..6,8.2 Heat treatment conditions ..6,8.3 Determination of Bake-Hardening-Index (BH2) ..7,9 Test report 7,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:40:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EN 10325:2006 (E),3,Foreword,This document (EN 10325:2006) has been prepared by Technical Committee ECISS/TC 1 “Steel - Mechanical,testing”, the secretariat of which is held by AFNOR.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest,by February 2007.,According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following,countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United,Kingdom.,Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:40:51 GMT+00:00 2006, Uncontrol……
……